Home       Technology       Products       News       Support       Human Resources       About us       Contact us
- Products -
Auto bender series
ZY-510CA Automatic Rule Bending Machine
ZY-510B General type auto bender
ZY-510C Fully auto bender
ZY-100 Creasing machine
ZY-510A precision auto bender
Laser cutting machine series
ZY1218-1500W Laser cutting machine
ZY1218-1000W Laser cutting machine
ZY1218-300W GSI laser cutting machine
ZY-1530High power laser cutting machine
ZY1218-400W Laser cutting machine
LED bonder series
ZY-270AGeneral high speed LED Bonder
ZY-270BMulti-function LED bonder
ZY-270C Up-down feeding LED bonder
K-200 IC high speed Bonder
K-100 IC high speed bonder
 
     
 
HUAZHENGYUAN > Products > Laser cutting machine series
鿴ͼ
ZY-1530High power laser cutting machine
CNC laser cutting machine (From 1000w-4200w)
Adopt the high- strength molded aluminum alloy beams of independent property rights and with finite element and dynamic simulation analysis to achieve to the highly match of the strength rigidity and servo drivers acceleration and deceleration together with CNC system.
ZY-1530High power laser cutting machine      
Intro Download Video

 

Adopt the high-precision ball screws and linear guiders of internationally renowned brand ,together with good lubricity to ensure the stability and reliability ,and the long-term stability of the running precision .
Adopt the integral high rigid load-bearing beams of the third generation of dual-drive gantry structure ,conquered the defects of split processing in the past and precision inconsistent in installation, to ensure the long-term stability of the axial flying optical path and the geometric accuracy .
Be equipped with the full compensation device in optical path of autonomous  developed ,to ensure the consistency of the beam diameter and the constancy of the focus in the entire range of processing .
Adopt the advanced optical path shaping techniques to ensure the constancy of the beam diameter in processing area, with reduced the number of lens in conventional optical system, it makes the optical path simpler.
Adopt the outer optical path components from American II-VI company, to avoid producing condensing on the lens ,an independent cooling system is used .
Adopt the automatic centralized lubrication system ,conquered the blindness of maintenance by the automatic lubricating to transmission parts ,to ensure the equipment be in an excellent state for a long time ,so as to ensure the accuracy and service life of transmission parts.
Be equipped with an automatic focusing system ,that is able to automatically set the focus position for deferent material and the thickness ,which greatly improved the processing efficiency .
A good dust removal system is the basis to ensure the long-term stability of cutting ,the partition and timeshare dust removal structure ensures the cutting position of rapid response to achieve the best effect of dust removal.
Be equipped with the optical path gas compensation function that can avoid diffraction and divergence of the beam during the conduction process by gas disturbance ,and can always maintain the positive pressure of clean gas in the optical cavity to prevent external smoke and enter in .
The cooling unit has two sets of independent water supply system ,one is the cooling laser source ,the other is the separate cooling outer optical path ,with low Ctemperature Cstart function ,the LED of which shows the temperature state and has the function of fault diagnosis display .
Adopt the flying optical path structure ,which can load and unload work pieces from three directions ,make the proximity  of man and machine excellent ,and can be placed in more that 3 meters in length .
The CNC controller PA 8000 is imported from Germany ,with genuine windows XP,high-capacity storage ,ultra high-speed computing ,and its stable and reliable .
Resuming broken cutting path
The most perfect function in current industry of resuming broken cutting path .Even power is out suddenly ,NT CNC controller can resume  broken cutting path,to save material cost .
Frog Jumping
Setting rapid moving in 3D ,to short rapid moving distance whch improves cutting efficiency
 Pre-piercing function .
Pre-piercing all before cutting ,to save piercing time and reduce accumulated heat effect
Frequency and focusing piercing
Piercing with high frequency and focusing ,to reduce  thick plates piercing time shortly ,which improves piercing efficiency greatly .
cutting  speed and laser power output
Control laser power output according to axes moving speed to ensure sharp angles cutting effects.
High-pressureN2 gas cutting
Cutting thick plates (stainless steel ,Aluminum )with high Cpressure N2 gas without oxidation.
Automatic aligning
Work pieces can be placed at any direction.ith automatic aligning function of NT CNC controller, machine can find out edges and rotate cutting shape at calculated angle automatically ,which saves lots of adjustment time and improves work efficiency greatly
Scanning cutting (Flying cutting )
Cutting along one axis to reduce lots of rapid moving position time(Thin plate)
Spline interpolation
Spine interpolation: cutting curves with automatic spline interpolation to get smooth cutting path.
Small holes function
Processing with pulsed laser output that reduces the heat on material ,small hold which dia-meter is smaller than the thickness can be achieved .
Automatic focusing system and up-down following system
Adopt import of non-contact capacitive sensor ,to achieve the cutting head automatic focus and up-down following ,And more with int series laser ,frequency and focusing high speed cutting can be achieved ,ness can achieved .
Int Series intelligent lasers
Int series intelligent lasers are of extraordinary high photoelectric conversion efficiency -24% double times NT-SM Basic lasers,which cuts down users 40% electricity cost ,compared to NT-SM basic lasers.
With the INT intelligent laser switched to stand-by mode,the consumptions of power and lasergas are lowed ,from which the total energy cost is only 1.1RMB per hour ,Working mode can be switched on by a single press of the button.
INT series intelligent lasers can automatically adjust laser gas consumption based on the actual laser power output, to avoid unnecessary  waste .
Int series intelligent lasers gas mixing ratio is changed to 50%:45%:5% (HE:N2:CO2)which dramatically cuts down 30% users operation cost,,compared to NT-SM basic lasers.
INT series intelligent lasers can improve cutting speed greatly ,compared to NT series .For example ,cutting speed ,1.8/min becomes 2.8m/min with 2000W int laser .
Not only INT series intelligent lasers operation efficiency is greatly improved by adoption of various intelligent technologies(High-speed laser output ,intelligent ramp output and intelligent sawtooth wave output,etc)but also the customers usage cost is down through energy-saving technologies(intelligent charging,smart idle and multi-point cooling etc)

Item No.

ZY1530

ZY1560D

Maximum X Axis travel

3050mm

3050*2mm

Maximum Y Axis travel

1550mm

1550mm

Maximum Z Axis travel

150mm

150mm

X Axis Rapid speed

60m/min

60m/min

Y Axis Rapid speed

60m/min

60m/min

Z Axis Rapid speed in down direction

20m/min

20m/min

Cutting speed

20m/min

20m/min

Position Accuracy(x/y axis)

0.03mm

0.03mm

Repeatability Accuracy(x/y axis)

0.01mm

0.01mm

Maximum working envelope

3050*1550mm

1550*3050+3050mm

Maximum loading  weight

1T

1.5T

Cutting Accuracy

0.05mm

0.05mm

Style of table

Pallets moving in plane

Pallets moving in plane

L

8000mm

12000mm

W

 

3500mm

3500mm

H

7t

8.75t

Auxiliary Gas O2

10bar

10bar

Auxiliary Gas dry air

10bar

10bar

Auxiliary Gas N2

25bar

25bar

Laser source

Int-1000sm-int-4200sm

Int-1000sm-int-4200sm

Laser transmission mode

Flying optical path

Flying optical path

CNC controller (mode)

PA-8000(Made in Germany)

PA-8000(Made in Germany)

CNC controller(Axes QTY

X.Y1.Y2.Z

Z.Y1.Y2.Z

CNC Controller(simultaneous controller axes qty)

4

4

CNC controller display size

1.5LCD

1.5LCD

CNC controller memory

RAM 2G Hard driver160G

RAM 2G Hard driver160G

Power supply

AC 3802% 50/60HZ

AC 3 3802% 50/60HZ

 

 
Home   |   Technology   |   Products   |   News   |   Support   |   Human Resources   |   About us   |   Contact us

HUAZHENGYUAN CNC Tel+86 755 81737365 Fax+86 755 81737369 Websitewww.szzhengyuan.com
AddressBld No.4,Xinxintian Industrial District, Shajing Street, Bao'an District, Shenzhen City ,Guangdong Province, China.

Powered bu buxun.net